Epoxy
Epoxy Sand – Component No.1 (Resin Composition with Sand)
Medium‑viscosity, modified epoxy resin composition with added sand. Used as part of a two‑component system (Component No.1 – resin composition with sand, Component No.2 – hardener) designed for creating durable, textured floor coatings on various surfaces – concrete floors, dry‑shake concrete floors, stairs, walkways, and other coverings. Can also be used for repairing various mineral surfaces, including concrete and cement mixtures. Suitable for indoor and outdoor use, on horizontal and vertical surfaces. Creates an excellent anti‑slip surface.
PROPERTIES:
- Forms an anti‑slip surface
- Good adhesion to various substrates
- Contains no organic solvents
- Odourless
- Short curing time
- Very high hardness and abrasion resistance
- Resistant to chemical agents
- High‑quality tinted filler
APPLICATION: The substrate must be clean, solid, and slightly rough. Surface moisture must not exceed 45%; at higher moisture levels, the material may change colour and adhesion may decrease. Apply on concrete surfaces no earlier than 28 days after concrete placement. Components No.1 and No.2 must be thoroughly mixed in the correct weight ratio 12:1. The weight of one mixed batch should not exceed 10 kg. Optimal coating thickness: 3–5 mm, maximum 20 mm. Optimal application temperature: +15 to +25°C; at higher temperatures, curing time will decrease. Before application, it is recommended to prime the surface with STAFOR epoxy primer. Tools and equipment must be cleaned immediately after use with an acetone‑based solvent.
DRYING TIME: Initial tack: 30–60 minutes at +20°C to +25°C. Curing time: approx. 24–48 hours, full cure after 7 days.
STORAGE: Store in original packaging at +5°C to +25°C. Shelf life is indicated on the packaging.
Hazard classification: Skin Irrit. 2, Eye Irrit. 2, Skin Sens. 1, Aquatic Chronic 2
Signal word: Warning
Contains: Epoxy resins
Hazard statements:
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H411 – Toxic to aquatic life with long‑lasting effects.
Precautionary statements:
P260 – Do not breathe vapours/gas/mist/spray.
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352 – IF ON SKIN: Wash with plenty of water.
P501 – Dispose of contents/container in accordance with local regulations.
Additional labelling:
EUH205 – Contains epoxy constituents. May produce an allergic reaction.
Hardener for Epoxy Sand (Component No.2)
Optically clear, low‑viscosity liquid. Intended for use as a hardener with STAFOR Epoxy Sand (Component No.1).
Mixing ratios (by weight):
- Epoxy Sand – STAFOR resin (Component No.1): 12
- Epoxy Sand Hardener (Component No.2): 1
Use: Both components must be mixed thoroughly; it is recommended to pour the mixture into another container and mix again. Pot life: 30–60 minutes at 25°C. Detailed application instructions available at http://www.stafor.lv
Limitations: Recommended mixture and air temperature: +15 to +20°C. Maximum mixture and air temperature: 25°C.
Tools: All tools and equipment must be cleaned immediately after use with acetone.
Safety: Wash hands and skin with warm water and soap. Protective goggles, gloves, and a respirator must be used during work.
Hazard classification: Acute Tox. 4, Skin Irrit. 2, Eye Dam. 1
Signal word: Danger
Contains: Amines
Hazard statements:
H302 – Harmful if swallowed.
H315 – Causes skin irritation.
H318 – Causes serious eye damage.
Precautionary statements:
P264 – Wash hands thoroughly after handling.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 – IF ON SKIN: Wash with plenty of water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P501 – Dispose of contents/container in accordance with local regulations.
Additional labelling:
P102 – Keep out of reach of children.
